Goodbye, RCI 1945-2012

RCI logo
RCI logo

In yet another example of government-sponsored international broadcasting ending, Radio Canada International calls it quits after 67 years.  Effective June 24, all broadcasts from RCI’s Sackville shortwave relay site will cease.  All satellite distribution will end and seventy-five percent of the RCI workforce will be laid off.  This means the end of almost all RCI original content.  The good news, according to the press release, is that RCI will continue on webcasting.

This is due to budget cuts to the CBC, which administers RCI.  The Canadian Parliament cut the RCI budget from $12.3 million CAD to $2.3 million CAD for 2012.  This cut in expenditures is saving each Canadian resident approximately $0.35 CAD per year.

Thus, this weekend is the last chance to hear RCI or CBCNord Quebec on any HF frequency.

I listened to RCI for many years, until they drastically reduced their English language shortwave broadcasts to North America in 2006.  Simply put, HF broadcasters are folding up shop and moving toward web-based distribution networks.  Those HF transmitters are expensive and they do not maintain themselves.

One drawback of this scheme is government censorship.  It is very easy to the government to block access to sites via internet firewalls.  It is very difficult to completely jam a radio station.

And perhaps those considerations are not important.

RCI transmitter site, Sackville, NB
RCI transmitter site, Sackville, NB, courtesy of Wikipedia

I wonder what will happen to their transmitters after sign-off?  According to the wikipedia article there are nine HF transmitters in use, with power levels ranging from 100-300 KW.  They are likely to be hauled away and scrapped, the building torn down.

Dog Days of Summer

That saying originates from Greek and Roman times, when Sirius, the Dog Star, aligned with the Sun during July and August and was thought to bring extra heat to the earth.  The Dog Days are evil times; seas boil, wine turns sour, dogs grow mad, and all other creatures became languid; causing to man, among other diseases, burning fevers, hysterics, and phrensies.

Bad news, indeed.  Add to that; air conditioners fail, general managers become cranky, and transmitters overheat causing damage to sensitive control circuits, which is even worse.

We shall be busy dealing with things like this:

AC condenser frozen dryer and piping
AC condenser frozen dryer and piping

Air conditioning condenser with low refrigerant. This unit either has a leak or was not charged properly. I would hazard the former.

AC condenser broken fan
AC condenser broken fan

Fan blade on condenser coil failed due to metal fatigue. I have seen this in more than one place.

Bard 5 ton wall mount AC unit
Bard 5 ton wall mount AC unit

These wall-mount Bard AC units are pretty reliable, however, even they fail from time to time. The best course of action is to have a maintenance plan, a backup plan, and the number of the best HVAC contractor that can be found.

Water and transmitters do not mix

This incident happened a few years ago.  I thought I had lost the pictures of the disaster, but I found them this morning on my thumb drive. Hooray!  This occurred one morning just before Christmas after the area received a snow/ice/rain storm.  The gutters on the old ATT long lines building were clogged with ice and the water on the roof built up.  Unfortunately, the transmitter was installed directly below a disused exhaust stack for the former backup generators.

I received the off-air call from the morning show while I was driving to the office.  I diverted and went to the transmitter site and found water pouring into the top of the main transmitter.

WBPM transmitter room flood
WBPM transmitter room flood

Thus, water ran down directly into the top of the QEI FMQ-3500 transmitter (transmitter was upgraded to 6 KW). Unfortunately, high voltage and dirty stack water do not mix. The combination of sooty, iron-laden water, and the B+ damaged much of the transmitter circuits beyond repair.  The main transmitter is on the right, the backup transmitter is on the left.

I inspected the backup transmitter, also a QEI FMQ-3500, and it seemed to me that no water made it into the unit.  I rigged the tarp to ensure that none did, which was a very pleasing bit of work, what with the cold, smelly, dirty diesel water dripping on my head and running down my neck and back.

Top of WBPM QEI FMQ-3500 transmitter
Top of WBPM QEI FMQ-3500 transmitter

The 1 5/8 coax switch was also damaged:

WBPM 1 5/8 coax switch
WBPM 1 5/8 coax switch

As was the remote control in the equipment rack:

WBPM Gentner remote control
WBPM Gentner remote control

Fortunately, the backup transmitter ran, although I pressed the plate-on button with a dry wooden stick while standing on a dry, non-conducting ladder.   Even so, I still felt a little trepidation holding that stick.

WBPM Saugerties, NY Nautel V-7.5 transmitter
WBPM Saugerties, NY Nautel V-7.5 transmitter

It took almost a year, but finally, the insurance company for the building owner came through, and a new Nautel V-7.5 transmitter was installed.  I believe this is the last V transmitter Nautel made.  We moved the transmitter location across the room, not under the old generator stacks.  We also removed the generator stacks and patched up the roof with hydraulic cement and roofing tar.  By the way, that yellow color should look familiar to anyone who ever worked inside a Bell Telephone System building.

North East Commercial Radio Antennas and Towers

NECRAT logo
NECRAT logo

Or NECRAT for those who have been around the internet for a while. Many, if not most of you will know Mike Fitzpatrick’s NECRAT website which features many pictures of radio transmitter sites around the country (not just the Northeast).

Even before I began blogging, I checked NECRAT often for interesting pictures of many different transmitter sites.

If you are one of the few who has not visited his site, go and check it out: http://www.necrat.us