We just finished installing one of these units for one of our clients. This is the third one that I have dealt with in the last two years. I have to say, these transmitters are pretty cool.
We also installed a 7/8 transfer switch and a 1.5 KW test load:
Another view:
New transmitter rack, processor, and remote control:
The former main transmitter, the venerable BE FM1B:
View of the 7/8 inch coax going out of the transmitter room to the tower:
Rarely, if ever, have I worked with a 7/8 rigid transmission line. Usually, it is a 1 5/8 or 3-inch line, which requires some amount of patience when installing.
Nice little transmitter site upgrade project.